Content Comparison

• Munis

• Enterprise ERP

• Tyler Enterprise Resource Planning
• EERP
• Content Manager
• CM

• TCM

• TCM Permissions 

The MU_ Group may be listed as *UNKNOWN* due to:

• The information entered into the TylerCM Munis Users Group entry and/or the TylerCM Group Prefix field(s) is not correct in the Content Manager for Munis Configuration screen is not entered correctlyin EERP
• The group is not yet existing in that corresponding TCM CM environment
• It is a custom group created within the CM full client with an ID that is more than 20 characters long
• The master password needs to be reset in the TylerCM for Munis Settings screen to refresh the connection between Munis EERP and TCMCM

1. Log into EERP Hub > System Administreation > General Administration > TylerCM for Munis Settings
   1. The TylerCM Munis Users Group and TylerCM Group Prefix are case sensitive, and should be upper case 
      If either are lower or mixed case: 
      1. Click Edit
      2. Overwrite/update Entry(s)
      3. Click Accept
      4. Go to step 4.b
2. Verify the MU_group exists in the corresponding

1. CM environment: 
   1. In that same

1. 1. EERP environment, navigate

1. 1. to Tyler Menu > System Administration > General Administration > TylerCM for Munis Settings
   2. Launch the first URL in a new tab
   3. Launch the

1. 1. CM Full Client

1. 1. via Webstart (uses Java) or J-link (does not use Java)
   2. Login to the

1. 1. CM Full Client with administrative rights 
   2. Administration > Security Manager > Groups > Verify if the MU_Group exists
2. If the MU_ group

1. exists ensure its Group ID is

1. less than 20 characters 
   While TCM will allow more characters when creating a custom group, Munis limits the amount of characters to the Group ID to 20 
2. If the MU_Group exists, navigate back to

1. EERP to complete a master password reset:
   1. Tyler Menu > System Administration > General Administration > TylerCM for Munis Settings
   2. Select Master Password 

1. 2. Overwrite tcmadmin with tylereerpservice in the first prompt
      Note - any ID known to be in the CM Full client ADMINS group for which the password is known can be used in lieu of tcmadmin or tylereerpservice
   3. Select Rebuild TCM Caches 
   4. Navigate back to Roles to see if the MU_Group populates without error. If not, please contact

1. 1. CM Support at +1 (800) 772-2260 ext 3807
2.  If the MU_Group does not exist in the corresponding

1. CM Full Client: 
   1. Check to see if the group was created in one of the other CM environments and

1. 1. create it within the

1. 1. environment

1. 1. where it is missing
   2. If the group does not exist in any environment please contact

1. 1. CM Support at +1 (800) 772-2260 ext 3807

How to Reset Master Password and Rebuild TCM CM Caches

How to sync users and TCM CM Permissions from Munis EERP to TCMCM